Pure Analyzer Essential v1.8.6 (UNLOCKED) WiN MacOSX: The Ultimate Guide to Audio Analysis and Measurement
Article with HTML formatting
Pure Analyzer Essential v1.8.6 (UNLOCKED) WiN MacOSX: A Comprehensive Review
If you are looking for a powerful and versatile RTA-system for audio analysis and measurement applications, you might want to check out Pure Analyzer Essential v1.8.6 (UNLOCKED) WiN MacOSX. This is a network-driven modular RTA-system that provides an extensive range of analyzer options for any imaginable audio analysis and measurement applications. In this article, we will review Pure Analyzer Essential in detail, covering its features, benefits, usage, add-on modules, pros and cons, user reviews, alternatives, and more. By the end of this article, you will have a clear idea of whether Pure Analyzer Essential is the right product for you or not.
Pure Analyzer Essential v1.8.6 (UNLOCKED) WiN MacOSX
Introduction
What is Pure Analyzer Essential and what does it do?
Pure Analyzer Essential is a standalone application that is the foundation of the Pure Analyzer System by Flux::, a leading developer of high-end audio software tools. The Pure Analyzer System is a network-driven modular RTA-system that provides an extensive range of analyzer options for any imaginable audio analysis and measurement applications. The system consists of three components: the Sample grabber plug-in, the Pure Analyzer Essential application, and the add-on modules.
The Sample grabber plug-in is a standard DAW plug-in available in all common formats (VST, AU, RTAS and TDM) that acquires the source and response signals from your DAW or any other audio source and sends them through the network using the ZeroConf/Apple Bonjour protocol. You can insert as many instances of Sample grabber plug-ins as required, on the same DAW, different DAWs, and even different computers altogether, and the Sample grabber also supports surround configurations.
The Pure Analyzer Essential application receives the sample feeds from the Sample grabber plug-ins and analyzes them in real time using a GPU-efficient 2D/3D graphic engine based on the OpenGL standard. The application provides an extensive set of tools for spectral analysis, vector scope analysis, phase analysis, metering analysis, sonogram analysis, waveform analysis, histogram analysis, EBU R128 loudness compliance analysis, statistical analysis, correlation metering analysis, trigger state analysis, transfer function analysis, impulse response measurement analysis, frequency response measurement analysis, THD+N measurement analysis, coherence measurement analysis, and more.
The add-on modules are optional extensions that provide specific tools for live sound analysis, metering/loudness measurement, and surround sound analysis. The add-on modules are Live Module (for live sound monitoring), Metering/Loudness Module (for broadcast standards compliance), and Surround Module (for destination folder for the Pure Analyzer Essential application and click Next.
Click Install to start the installation.
Click Finish to exit the installer.
To install Pure Analyzer Essential on Mac OS X, follow these steps:
Open the disk image file that you downloaded from the website.
Drag and drop the Pure Analyzer Essential application icon to the Applications folder.
Drag and drop the Sample grabber plug-in icons to the corresponding plug-in folders (VST, AU, RTAS, or TDM).
Eject the disk image file.
To activate Pure Analyzer Essential, follow these steps:
Launch the Pure Analyzer Essential application.
Click on the Flux:: logo on the top left corner of the application window.
Click on the Activate button and enter your license key.
Click on the OK button and restart the application.
Launch your DAW and insert the Sample grabber plug-in on any track or bus that you want to analyze.
Click on the Flux:: logo on the top left corner of the plug-in window.
Click on the Activate button and enter your license key.
Click on the OK button and restart your DAW.
How to use the Sample grabber plug-in to acquire audio signals
The Sample grabber plug-in is a standard DAW plug-in that acquires the source and response signals from your DAW or any other audio source and sends them through the network using the ZeroConf/Apple Bonjour protocol. You can insert as many instances of Sample grabber plug-ins as required, on the same DAW, different DAWs, and even different computers altogether, and the Sample grabber also supports surround configurations.
To use the Sample grabber plug-in, follow these steps:
Launch your DAW and open or create a project that contains the audio signals that you want to analyze.
Insert the Sample grabber plug-in on any track or bus that you want to analyze. You can insert multiple instances of Sample grabber plug-ins on different tracks or buses, as long as they have different names. You can also insert Sample grabber plug-ins on different DAWs or computers, as long as they are connected to the same network.
Select the channel configuration of the Sample grabber plug-in according to your audio signal. You can choose from mono, stereo, quadraphonic, 5.1 surround, 7.1 surround, or 8 channels. You can also select a custom channel configuration by clicking on the Custom button and assigning each channel to a specific speaker position.
Select the sample rate of the Sample grabber plug-in according to your audio signal. You can choose from 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, or 384 kHz. The sample rate of the Sample grabber plug-in must match the sample rate of the Pure Analyzer Essential application, otherwise the analysis will not be accurate.
Select the network interface of the Sample grabber plug-in according to your network connection. You can choose from Ethernet or Wi-Fi, depending on which one you are using to connect to the network. The network interface of the Sample grabber plug-in must match the network interface of the Pure Analyzer Essential application, otherwise the communication will not be established.
Select the buffer size of the Sample grabber plug-in according to your network bandwidth and latency. You can choose from 64, 128, 256, 512, 1024, 2048, or 4096 samples. The buffer size determines how much audio data is sent at a time through the network. A smaller buffer size means lower latency but higher bandwidth usage, while a larger buffer size means higher latency but lower bandwidth usage. You should choose a buffer size that balances between latency and bandwidth according to your network conditions.
Click on the Start button on the Sample grabber plug-in to start sending audio data through the network. You should see a green LED indicator next to the Start button when the data transmission is successful. You can also see the name, channel configuration, sample rate, network interface, and buffer size of the Sample grabber plug-in on the top of the plug-in window.
Repeat steps 2 to 6 for any other Sample grabber plug-ins that you want to use for analysis.
How to use the Pure Analyzer Essential application to analyze audio signals
The Pure Analyzer Essential application is a standalone application that receives the sample feeds from the Sample grabber plug-ins and analyzes them in real time using a GPU-efficient 2D/3D graphic engine based on the OpenGL standard. The application provides an extensive set of tools for spectral analysis, vector scope analysis, phase analysis, metering analysis, sonogram analysis, waveform analysis, histogram analysis, EBU R128 loudness compliance analysis, statistical analysis, correlation metering analysis, trigger state analysis, transfer function analysis, impulse response measurement analysis, frequency response measurement analysis, THD+N measurement analysis, coherence measurement analysis, and more.
To use the Pure Analyzer Essential application, follow these steps:
Launch the Pure Analyzer Essential application.
Select the network interface of the Pure Analyzer Essential application according to your network connection. You can choose from Ethernet or Wi-Fi, depending on which one you are using to connect to the network. The network interface of the Pure Analyzer Essential application must match the network interface of the Sample grabber plug-ins, otherwise the communication will not be established.
Select the sample rate of the Pure Analyzer Essential application according to your audio signal. You can choose from 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, or 384 kHz. The sample rate of the Pure Analyzer Essential application must match the sample rate of the Sample grabber plug-ins, otherwise the analysis will not be accurate.
Select the source feed that you want to analyze from the list of available Sample grabber plug-ins on the left side of the application window. You can see the name, channel configuration, sample rate, network interface, and buffer size of each Sample grabber plug-in on the list. You can also see the signal level and peak indicators for each channel of the selected source feed on the bottom of the application window.
Select the analysis mode that you want to use from the tabs on the top of the application window. You can choose from Spectral, Vector Scope, Phase, Metering, Sonogram, Waveform, Histogram, Loudness, Statistics, Correlation Metering, Trigger State, Transfer Function, Impulse Response Measurement, Frequency Response Measurement, THD+N Measurement, Coherence Measurement, and more. Each analysis mode has its own set of parameters and options that you can adjust on the right side of the application window.
View the analysis results on the main display area of the application window. You can see the 2D or 3D visualization of the audio signal according to the selected analysis mode. You can also zoom in or out, rotate, pan, tilt, or reset the view using the mouse or keyboard commands. You can also capture or export the analysis results as images or text files using the buttons on the top right corner of the application window.
Repeat steps 4 to 6 for any other source feeds or analysis modes that you want to use for analysis.
How to customize the settings and preferences of Pure Analyzer Essential
Pure Analyzer Essential allows you to customize various settings and preferences to suit your needs and preferences. You can access the settings and preferences menu by clicking on the Flux:: logo on the top left corner of the application window and selecting Settings/Preferences from the drop-down menu.
Some of the settings and preferences that you can customize are:
General: You can adjust the general settings such as language, theme, font size, frame rate limit, auto update check, OSC port number, MIDI learn mode, and more.
Display: You can adjust the display settings such as resolution, full screen mode, anti-aliasing mode, vertical sync mode, frame buffer mode, and more.
Audio: You can adjust the audio settings such as audio driver type, audio device name, input/output channels, buffer size, sample rate, latency compensation, and more.
MIDI: You can adjust the MIDI settings such as MIDI device name, MIDI channel number, MIDI controller name, MIDI learn mode, MIDI learn reset, and more.
Presets: You can manage the presets for each analysis mode, such as saving, loading, renaming, deleting, importing, exporting, and more.
Layout: You can customize the layout of the application window, such as resizing, repositioning, hiding, or showing the different elements, such as the source feed list, the analysis mode tabs, the parameter panel, the main display area, the signal level and peak indicators, and more.
Colors: You can customize the colors of the different elements of the application window, such as the background, the text, the grid lines, the curves, the bars, the markers, the labels, and more.
Scales: You can customize the scales of the different elements of the application window, such as the frequency axis, the amplitude axis, the phase axis, the time axis, the loudness axis, and more.
Ranges: You can customize the ranges of the different elements of the application window, such as the frequency range, the amplitude range, the phase range, the time range, the loudness range, and more.
You can also reset all the settings and preferences to their default values by clicking on the Reset button on the bottom right corner of the settings and preferences menu.
What are the add-on modules for Pure Analyzer Essential
Pure Analyzer Essential is a modular system that can be extended with optional add-on modules that provide specific tools for live sound analysis, metering/loudness measurement, and surround sound analysis. The add-on modules are Live Module (for live sound monitoring), Metering/Loudness Module (for broadcast standards compliance), and Surround Module (for surround sound monitoring and analysis). The add-on modules can be purchased separately and activated with a license key.
What are the Live Module and what does it offer?
The Live Module is an add-on module that provides tools for live sound monitoring and optimization. The Live Module offers features such as:
Spectrum analyzer with peak hold function
Transfer function analyzer with magnitude and phase response curves
Impulse response measurement analyzer with impulse response waveform and ETC (energy time curve) display
Frequency response measurement analyzer with frequency response curve and coherence function display
THD+N measurement analyzer with THD+N curve and harmonic distortion display
Delay finder tool that automatically calculates the delay time between two signals
Polarity inversion tool that reverses the polarity of a signal
Signal generator tool that generates various types of test signals, such as sine, pink noise, white noise, sweep, and MLS (maximum length sequence)
Capture tool that records and saves the audio signals for offline analysis
The Live Module is ideal for live sound engineers who want to monitor and optimize the sound quality and performance of their PA systems, speakers, microphones, mixers, processors, and other audio equipment. The Live Module can help them to identify and correct problems such as feedback, phase cancellation, frequency response anomalies, distortion, delay, polarity issues, and more.
How to purchase and activate the Live Module
To purchase the Live Module, you will need to visit the official website of Flux:: or an authorized dealer and pay the required fee. You will receive a license key that will allow you to activate the Live Module with your Pure Analyzer Essential application.
To activate the Live Module, follow these steps:
Launch the Pure Analyzer Essential application.
Click on the Flux:: logo on the top left corner of the application window.
Click on the Activate button and enter your license key for the Live Module.
Click on the OK button and restart the application.
Select the Live Module tab on the top of the application window.
Enjoy the features and benefits of the Live Module.
How to use the Live Module with Pure Analyzer Essential
To use the Live Module with Pure Analyzer Essential, follow these steps:
Launch your DAW and insert the Sample grabber plug-in on any track or bus that you want to analyze. You can insert multiple instances of Sample grabber plug-ins on different tracks or buses, as long as they have different names. You can also insert Sample grabber plug-ins on different DAWs or computers, as long as they are connected to the same network.
Select the channel configuration, sample rate, network interface, and buffer size of the Sample grabber plug-in according to your audio signal and network conditions.
Click on the Start button on the Sample grabber plug-in to start sending audio data through the network.
Launch the Pure Analyzer Essential application and select the network interface and sample rate according to your network connection and audio signal.
Select the source feed that you want to analyze from the list of available Sample grabber plug-ins on dcd2dc6462